Set Radio Station Presets

Find the radio station you would like to store. Then press and hold down the button you wish to assign to that station until you hear a BEEP. That station will then be stored to that button.

First navigate to station you want to set as a preset. Then press the MEMO button. Use the TUNING buttons to scroll through the 30 different preset numbers. Press the MEMO button once more to store on the preset that you chose. Now you can press the PRESET button and navigate through you presets using the TUNING buttons.

every time after you find your station, press and hold the number button, a beep sound comes off and the station is set.

If you have buttons on your radio that allow you to switch stations, it generally is simply a matter of pressing and holding the button in place for 10-15 seconds. The year, make, and model of the vehicle doesn't say much, as vehicle may have an aftermarket radio. Just find the station you want and if there is a are button presets, just push and hold it in. On most of my cars, old and newer that I have owned, confirmation of the setting is generally accompanied by a beep. Good luck! JD

start the car turn the radio on scroll to the station you want then push and hold the preset button 1 thru 9 untill it beeps then go to the next station you want to set and do the same.

Station Pre Set:
You can save 4 pre sets on this radio (1-4) tune the radio to the station you want to save then PUSH and HOLD one of the pre set butons until the sound returns, the station is saved to that pre set. Repeat for the 3 presets.

Clock:
Hour: Push and hold the CLK button and at the same time push the SEEK button to adjust. < decrease hours > increase hours.
Minute: Push and hold the CLK button and at the same time push the TUNE button the adjust. < decrease minutes > increase minutes.

One can disconnect the battery and reconnect after a few seconds to erase all presets on the radio.

If one wants to set a radio station preset then continue to push the button for the preset until the station it is on is programmed into memory.

If you are talking about setting the presets so you can just press usually its #1 thru #6 once you have the station you want to preset just hold down the preset button for about 5 seconds. The radio will usually beep, and thats it.

Manuallly set to the station you want,then pick a preset button & hold down until you hear a beep or 4 about 5 secs

Enter the 5-digit Radio Code using the radios station preset buttons. After entering the fifth digit press the > button and the radio will activate. Any presets you had before the power loss will return. Apparently a capacitor in the radio holds that information