Hello! Not hard to do...Here is the location diagrams...#1=4.3L...#2=5.3 & 6.0L
Guru....Saailer
#1
#2
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
The thermostat is located in the forward most part of the intake manifold directly in the center. It is located in an in-closed housing with 2 studded bolts.
Simply follow the Large water pump hose on top of the intake manifold to it. You don't need to remove this housing,
just remove the 2 bolts and lift up the housing with the large hose attached to it.
The thermostat will be sitting in the recessed area of the hole in the intake manifold.
remember to inset the spring towards the motor on the new one
703 views
Usually answered in minutes!
×