Instructions
1
Shut off the engine of your Bravada, remove the keys from the ignition, and open the hood.
2
Locate the plug that powers the outdoor sensor. You will find it in between the front bumper and frame of the car, just to the right of the rightmost support bracket. The sensor plug is green.
3
Unplug the outdoor temperature sensor by separating the plug from its socket.
4
Plug the sensor back in, close the hood, and start the car. If the sensor's performance has not changed, it will need to be replaced.
Read more : http://www.ehow.com/how_7982496_reset-bravada-outdoor-temperature-sensor.html
SOURCE: Air temperature readout stuck at 50
It does sound like a sensor problem. Not sure where the sensor its self is, but they are usually by the drivers side mirror, or underneath the windsheild valance. They need to be placed in a area where wind wont give false readings due to wind chill factors. Any dealership should be able to tell you. good luck. John...
SOURCE: Always blows cold air
I have a 98 bravada that had the same problem, and after i had to replace the water pump, it never gave me a problem again.
SOURCE: Where is the temperature sensor located in a
on a inline six the sensor is screwed into the engine block ,you have to remove the alternator to get to it.on a v-8 the ect sensor is at the front left cylinder head above the number one spark plug..
894 views
Usually answered in minutes!
×