Question about 2000 Oldsmobile Intrigue
I think your traction control button is on the center console behind the Shifter.
But, I don't think that is the problem. That switch will cause the traction control and light to turn on and off. It should not affect the brake light and anti-lock light.
I would first check your brake fluid level. Top it off with the correct fluid. The fluid is a DOT number; like DOT3 or DOT5. Use the correct DOT fluid.
If the fluid is very low, you may need your brake fluid system bled to remove any air. And you may want to check the brake pads. Low fluid may mean you need new pads.
If that doesn't work, go to an auto parts store that will scan your car for ODB2 error codes. AutoZone will do it for free. I suspect you may have a bad wheel bearing. That will cause the ABS and Trac lights to go on. I've replaced GM bearing/sensors on several of my cars. The last one was my 2005 Bonneville. The bearing and sensor are combined in one unit.
Posted on Aug 09, 2011
Clock stays on after you shut off power also shifter light stays on kills battery over night
Posted on Feb 24, 2013
Tips for a great answer:
Feb 05, 2016 | Cars & Trucks
May 20, 2011 | Buick Regal Cars & Trucks
Jan 27, 2011 | 2007 Chevrolet Tahoe
Visual Inspection Chart
Jan 25, 2011 | Mercury Mariner Cars & Trucks
Dec 06, 2010 | 1998 Buick Regal
Apr 21, 2010 | 2000 Oldsmobile Intrigue
Jan 24, 2010 | 2003 Ford Expedition
Jan 01, 2010 | 2000 Pontiac Sunfire
May 19, 2009 | 2006 Chevrolet Equinox
Oct 22, 2008 | 1995 Ford Contour
794 people viewed this question
Usually answered in minutes!