20 Most Recent
1995 Ford Explorer - Page 5 Questions & Answers
Fixya expert sources
The odds your sensor is bad is about 30%
The odds you have internal trans wear & damage
is about 70%
Sensors only report mechanical things that are not right
when the vehicles computer scans them,that said, sensors
do fail, BUT you use the codes to diagnose the system
& component test
Codes DO NOT indicate a failed part or need to replace any
All parts have to be tested & fail, or why would you waste money
throwing parts at a problem
We did that in that 1960's & got away with it,not with today's
technology
3/29/2014 9:35:37 PM •
1995 Ford...
•
Answered
on Mar 29, 2014
Brakes
It sounds to me as though it is the master cylinder. You can try bleeding the master cylinder itself, just to see if you have pressure there. But if you cannot pump them up, I'm betting on a bad master cylinder. I hope this helps you.
3/25/2014 11:40:44 PM •
1995 Ford...
•
Answered
on Mar 25, 2014
Fuel pump continuously runs no start
have a pressure test done on the fuel manifold to check for fuel pressure regulator faulty and allowing the fuel to continually back to the tank and not having pressure in the manifold for the injector operation
3/10/2014 5:08:12 AM •
1995 Ford...
•
Answered
on Mar 10, 2014
4 wd will not go in
you will need a mechanic to scan test the 4wd module to retrieve codes, once you have a code I can help further, just too many unknowns at this point to guess whats wrong
2/4/2014 2:26:31 AM •
1995 Ford...
•
Answered
on Feb 04, 2014
Click once wont start
starter problem bad battery cables or connections loose if outside solinoid could be burnt
1/28/2014 3:02:18 AM •
1995 Ford...
•
Answered
on Jan 28, 2014
Not finding what you are looking for?