Fiat Cars & Trucks - Recent Questions, Troubleshooting & Support

0helpful
3answers

Hi I have a Fiat Stilo car. I.6 16 valve, year

run the fault codes indicates that an electronic component is overheating could be crank/cam position sensor , ignition module or coil/s
11/20/2021 2:25:46 PM • 2002 Fiat Stilo • Answered on Nov 20, 2021
0helpful
3answers

Temperature and fuel level gauge stopped suddenly on ziro position

Often times more than one gauge having a problem is related to the common ground. Once you gain access to the connections behind the dash, just unplug/disconnect and then plug/connect the harness/wiring back into the gauge panel to see if you get a reading. If not, you'll need to trace the wiring using a digital voltmeter as well as verifying the grounding wires. Any connections that aren't clean should be sanded lightly and a light coat of grease applied. Di-electric grease is best as it seals out moisture but won't cause a connection.
11/16/2021 1:05:23 AM • Fiat Cars &... • Answered on Nov 16, 2021
0helpful
1answer

P2299 & P2262 Question. If it goes into failure mode again will it rectify itself after switching car off and restarting. (wife pulled over and got it towed straight away without restarting it).

Question edited for clarity. It is a bit harsh to call it 'Failure Mode'. It is purely and engine malfunction light (EML). Your vehicle constantly does diagnostics and if after a while, the error is not there, it will reset and remove the error status. Or you can just go to the garage and ask them to reset the the EML This explains P2299 https://www.obd2-code.com/2019/01/p2299-brake-pedal-positionaccelerator.html This explains P2262 https://www.engine-codes.com/p2262.html ..
11/12/2021 11:13:51 PM • Fiat Cars &... • Answered on Nov 12, 2021
0helpful
1answer

I have a 1100 uno if u select reverse but it wil be in 2nd and if u go in to neutral it wil stil be in 2d gear so it selects 2nd gear by it self and the lever is in the revers position?

This sounds like a linkage or linkage bush has failed. Open the bonnet and find the linkages on the transmission, (gearbox), housing. It should have 2 heavy cables attached to it. Get a helper to work through the gears and watch the linkages and cables move. The linkage should move everytime the gear stick is moved. The cables should also have no slackness to them. If the cables are slack or the linkage doesn't move everytime get a good mechanic to look at it. Changing bushes and cables involves crawling around underneath the car and trying to get up behind the engine so a mechanic has the tools and vehicle lifts to make this a lot quicker and easier.
11/9/2021 6:59:04 PM • Fiat UNO Cars &... • Answered on Nov 09, 2021
0helpful
1answer

Fiat Stilo 2004 gas manual P1688 what does it mean?why the car is difficult to start morning but after that is so easy

https://www.fiatforum.com/stilo/125372-stilo-loose-connection-p1688.html
11/9/2021 12:03:12 PM • Fiat Cars &... • Answered on Nov 09, 2021
0helpful
1answer

DoraMy Fiat Uno 1100 would

I got a uno 1100 that if u park it at night the next morning if u syart it and put it in to revers gsar there is nothing but wil go forward, u can put it in neutral but it wil still be in 2ed gear and if u select 5th the gearbox wil lock up so i recon it selecs 2 gears at one time.
11/9/2021 10:02:05 AM • Fiat 500 Cars &... • Answered on Nov 09, 2021
0helpful
1answer

Why is there a round yellow light in the fuel meter for my fiat sienna 2005 1.7 L diesel engine?

Is the yellow light a plain dot with no shapes or signs on it? If it is and it is on the fuel level gauge it is most likely a 'Low Fuel' warning light. Filling the fuel tank past a quarter tank should turn this light off. For the steering check the steering fluid level. A low level makes the steering harder to turn as there is not enough fluid in the system to work properly. Top the fluid up to the correct 'Max' mark and bleed the system. To bleed the system is really easy. Start the engine and turn the steering all the way to the left then all the way to the right. Do this 3 or 4 times. Turn the engine off and re-check the steering fluid level. The oil leak could be something more serious so I will need more information to help you. First check your oil level with the dipstick. It should be between the two marks on the stick. Too much oil in the engine can cause other problems. Where EXACTLY is the oil spilling out? Is it from the filler hole and cap you pour the oil into when your topping it up? Is it the bigger, long cover on top of the engine that the oil filler cap is fitted into? Comment below an I'll see if I can help you more.
10/19/2021 3:22:39 PM • Fiat Cars &... • Answered on Oct 19, 2021
0helpful
1answer

How do I fix my digital speedometer on my fiat 500l

Make sure the digital one is set to the correct units (MPH or KMH)
10/14/2021 8:01:34 PM • Fiat 500 Cars &... • Answered on Oct 14, 2021
0helpful
2answers

Fiat palio 1.6 twin cam 16valve cam timing

The old trick is to cut the current belt in half along its length, then remove the front most half of the old belt. Slide the new belt up to the remaining half of the old belt, then cut of the old belt and push the new belt fully on to the sprockets.
10/13/2021 4:01:07 PM • Fiat 124 Cars &... • Answered on Oct 13, 2021
0helpful
1answer

Fiat Uno 1100. I replaced my carburetor with a new one. Now it just starts, idles and dies. Why does it do this please.

Moved category from 'Garden' to 'Fiat Uno'. Edited and retyped question to get rid of the SHOUTING! Please don't type in uppercase letters. Your issue has all the security system working against you. Did you disconnect the battery? If so you need to do a system reset. Did you check that the fuel pump is working well and there are no air locks. https://www.google.com/search?q=fiat+uno+1100+security+reset ..
10/6/2021 9:16:24 PM • Fiat UNO Cars &... • Answered on Oct 06, 2021
0helpful
2answers

Where can i download a workshop manual for a 2002 fiat siena 1600 elx

http://www.usse-natation.com/manual-for-fiat-siena-2003.pdf
9/30/2021 7:55:13 PM • Fiat Cars &... • Answered on Sep 30, 2021
0helpful
1answer

How to remove the brake booster from 1.2 fiat palio 2006

Hello. The brake master cylinder must be removed first then the brake booster second. Good luck and keep me informed; if you want to.
9/8/2021 9:36:35 AM • Fiat Palio Cars... • Answered on Sep 08, 2021
0helpful
1answer

Hi,can you tell me how to remove the alternator on a fiat punto grande 1.4 aircon petrol 06 plate,its the top bolt that's causing the issue can you remove it without having to disconnect the aircon?

I would look on u tube put in the make and model some guys post some good vidoes on there have found it very good .
8/20/2021 1:43:57 PM • Fiat Punto Cars... • Answered on Aug 20, 2021
0helpful
1answer

Fiat Uno 1100 cylinder head bolts torque settings

1.1 uno head bolts torque settings
8/13/2021 6:30:44 PM • Fiat UNO Cars &... • Answered on Aug 13, 2021
0helpful
1answer

Can i make my car into a petrol carburetor type

Injectors coil failed or conectar wiring failure better you take 12volt 5 Watt bulb remove injecter conectar if conect 2 wire bulb now bulb glow on off on off injector power is ok
8/8/2021 3:55:09 PM • 2008 Fiat Palio... • Answered on Aug 08, 2021
0helpful
2answers

Black smoke from exhaust,engine gets heated ,high fuel consumption

CHECK YOU CAM TIMING
8/8/2021 2:09:48 PM • 2008 Fiat Palio... • Answered on Aug 08, 2021
0helpful
1answer

What is the full torque specs for a fiat fironio 1.4

The fiorino name have been used by Fiat since 1977. Please be specific on the model year. Fiat also have 1.4L engine called FIRE. Used by so many models.
8/5/2021 6:06:22 PM • Fiat Cars &... • Answered on Aug 05, 2021
Not finding what you are looking for?
Fiat Logo

3,881 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Fiat Experts

Brad Brown

Level 3 Expert

18859 Answers

wadingriver
wadingriver

Level 3 Expert

2230 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...