20 Most Recent 2006 Fiat Strada Questions & Answers


check your fuel pump pressure, and fuel rail pressure

2006 Fiat Strada | Answered on Oct 31, 2020


Bad transmission.

2006 Fiat Strada | Answered on Jun 29, 2019


heater tap ma be siezed or blocked
or its control cable loose or broken

2006 Fiat Strada | Answered on Feb 11, 2019


Put head gasket fix to coolant good one it is working I did a few times.

2006 Fiat Strada | Answered on May 15, 2017


Check your mass air sensor MAS it may need cleaned or changed

2006 Fiat Strada | Answered on Aug 11, 2016


cam/crank position sensors
immobilizer issues
ignition control module
injectors nor working
low fuel/ no fuel pressure
run the fault codes to determine which of those need fixing

2006 Fiat Strada | Answered on Jun 10, 2016


On this website (link below you find fuse box diagram and description for:

Fiat Punto mk2

Fiat Punto mk2 Classic from 2004 fuse box diagram Auto Genius

Fiat Strada FL
Fiat Strada mk4 FL from 2011 fusebox diagram Auto Genius

2006 Fiat Strada | Answered on Mar 29, 2016


On this website you find fuse box diagram and description for Fiat Scudo mk2

Fiat Scudo mk2 2006 2016 fuse box diagram Auto Genius

2006 Fiat Strada | Answered on Mar 20, 2016


sounds like a bad motor mount

2006 Fiat Strada | Answered on Dec 29, 2015


More details, please.

2006 Fiat Strada | Answered on Feb 20, 2015


First off, make sure if you are replacing the fuse yourself, take the keys OUT of the ignition and put them in your pocket!

I'm not 100% sure, but there should be a fuse box under the hood on the driver's side. In the lid of the box after you remove it (or on a label on the top of the box) is usually a diagram showing the location and function of all the fuses in that box. I think it's listed in the manual as being fuse spot F54. If my sources are correct it should be a 20amp (yellow) fuse but always check the recommended fuse replacement by the diagram or in your owner's manual.

A helpful tool to buy from an auto parts store or auto parts section of a wal mart or k-mart, is an automotive fuse puller with extra replacement fuses for your car. If you're unsure of what fuse is the right one, take the old fuse out carefully with needle-nose pliers and take it to the store to compare. If you take out the right fuse, driving with out it should not harm your car in any way (it's broken already).

I hope I could help you find the right fuse box for the cigarette lighter. Good luck, and don't forget to rate! Thank you.

2006 Fiat Strada | Answered on Jul 21, 2014


To get to a window mechanism, the inside panel has to be removed. Locate all screws that hold the panel handle and any other part of the panel to the door frame. The sides and bottom of the panel are held in place by panel retainers , which pop out of the door frame. Place a panel tool or flat screw driver along the sides and bottom to pop out the retainers. Once the sides and bottom are free t, the top of the panel should lift up out the track on top. Be careful of any wiring before you remove the panel.

2006 Fiat Strada | Answered on Jun 11, 2014


#1 piston must be on the compression stroke top dead center

2006 Fiat Strada | Answered on May 03, 2014

Not finding what you are looking for?
Cars & Trucks Logo

245 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Fiat Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Gustavo Ortiz
Gustavo Ortiz

Level 3 Expert

637 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Strada Fiat

  • Strada Fiat

Most Popular Question

fiat strada 1 2 el bakkie when starting

  • Cars & Trucks
Loading...