Hoover Washing Machines - Page 3 - Recent Questions, Troubleshooting & Support

Defective power switch and/or cycle timer

Is usually a sign the washtub suspension is worn or broken.

Either the door lock has failed or the wiring or the programmer has a problem. Removing the cabinet top should allow a view of the wiring, etc. Manipulating or removing the door lock from inside the cabinet isn't easy as often the retaining screws are accessible only when the door is open and carefully applied brute force is the last resort.

if the hoses are clear I suspect ur have a control board problem

https://www.youtube.com/watch?v=3R_RYO6jSOs E21. Canister fill pump triac faulty. Possible fault Wiring faulty; Electronic board faulty. https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/

Hi! Look here:https://service.hoover.co.uk/advice-centre/error-code-e20/ - error solvinghttps://www.bestadvisers.co.uk/portable-washing-machines - portable washing machines, just in case (i use it like an extra washer)

https://www.youtube.com/watch?v=zjULf1lLW5U

i only find e21 error for hoover washers...

Hoover suggests that the water fill valve(s) may be turned off. Error 2 means It cannot fill correctly according to their owners manual.

Try here https://www.fix.com/parts/

check fan assy

Error code E09means there is something wrong with the part in the washing machine control board that drives the motor.

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine or this https://www.youtube.com/watch?v=Fd8ddreBYL4

Help me
I am important state??