but I'm not able to find out the explaination on Xerox' support. Chain 14 has to do with the scanner not passing self test, not comming to ready. CCD Module, exposure lamp or one of the scanner baords
xerox ducu centre 420dc wonte come to ready. no error code turn it off and on clears sometimes but takes a lot of trys When the machine comes on. There is a cable that runs from the scanner to the ...
Xerox DocuMate 252 scanner. 2. Click the Properties button. Your scanner has a built-in power saving feature that is set to power down after 15 minutes of idle time. You can change the time before the
bad scanner motor gear or even curciut board. There might even be some major binding that might knocked out some sensor, giving this condition. Most times, a service call needs to be placed with Xerox
...scanner says ready but when I put in the paper it says not ready take out the paper. The 8830 has a code LL-22, is that something I can fix? As far as the scanner insert a sheet to copy and when it ...
Question about Phaser 3100MFP/S Laser Printer
XEROX PHASER 3100MFP PRINTER AND SCANNER NOT WORK Are you getting any messages? Are you out of ink, need to replace the drum unit? The fuser overheated? Or does it come to ready and just not function?
Xerox 8830DDS Everything works fine but for a NOT READY error. HELP!!! clean glass of scanner and document guide of scannerif problem not solved u need to clean full optics of scanner
Xerox 7356 Scanner which continually says: Not Ready on the display. Any suggestions on how to troubleshoot this problem or where to go on-line to research troubleshooting? it is likely the lamp. Easy
Question about Ir 3300 Black & White Copier
...to 12 Sqcm) only not in whole page also in xerox not in print copy by computer, drum is all ready new install Then there is something wrong with the scanner. Have you tried cleaning the platen
Question about Laser All-In-One Machines 4260/S WorkCentre 4260S Monochrome
xerox workcentre 4260 that was giving the error "Unable to detect Raster Output Scanner", i power cycled the printer several times and now the printer comes to ready but nothing prints. The job status
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions