Question about Occupancy Motion Sensor Wall Switch - White, SL-6107-WH
heath-zenith sl-6107 wiring diagram 2 wire switch? does it need a neutral? maybe a ground needed? hi there the wirings colour codes for nz are as follows OLD WIRING CODE Green = Earth Black = Neutral ...
Question about SL-6106-IV Motion Sensing 180° Wall Sensor, Ivory
Heath Zenith SL-5597 only works in test only mode My SL-5597 now only works in the test mode. Did my motion sensor die? Do I just need to replace the motion sensor to fix the problem?? Thanks Sounds ...
Question about Occupancy Motion Sensor Wall Switch - White, SL-6107-WH
motion sensor for bathroom lights SL-6107-WH need to know what color ires are? BLK,Brn,Red,Grn OK .. this sounds european .. but as I understand it ,,, the black would be power connection .. the brown
Question about SL5316WHB Replacement WideAngle Motion Sensor White
model no. is :-heath zenith sl-5318-bz-a The black wire goes with the black house supply wire, and the red wire goes with the black wire from the lighting fixture. The white wires all connect together
motion sensor light not tripping off If new, then it could be faulty. If old, then may have water damage. POSSIBLE CAUSE 1. Light switch is turned off. 2. Flood lamp is loose or burned out. 3. Fuse is
Question about Secure Home Motion Activated Light
...Heath zenith sh 5105 motion detector flood light. I wired it to plug into an outlet. Flood light comes on when I plug it in and stays on. Seems as if the sensor isn't working. Do I have it wired ...
Question about Heath/Zenith SL-5411-WH Heath / Zenith SL-5411-WH Motion Activated Sec
...sensor itself. Should be a dusk to dawn setting that will keep it off during those times and then function at night. as far as not working I would first suggest setting the sensitivity. Disrupting to ...
Question about SL5316WHB Replacement WideAngle Motion Sensor White
i have a led motion light the infrared motion sensor works but all of a sudden one evening it wouldn't come on. I might be something was wrong with wiring circuit. Check it !
Question about SL-5318-WH Dual Brite Motion Sensor Light Control with Full Metal Covers, White
...motion sensing feature and just have an on-off light. To disable the sensor, (turn off the power!) unscrew and remove the light sensor (it is the reposition-able box under the light.) It depends on ...
Question about Secure Home Motion Activated Light
...Heath Zenith), Black from house to sensor, Other colored wire from sensor to lights (again unless this light connection is done internally in the sensor by Heath Zenith)- Also check that the ...
Usually answered in minutes!
1,118 Questions
410 Questions
284 Questions
217 Questions
130 Questions