Questions & Answers for: whirlpool oven burner indicator light

...Whirlpool super capacity 465, the surface light for the burners comes on, the burners don't heat up, nor does the oven,(the light that says oven is on does not light up). I checked the main circuit ...

...Whirlpool Electric Range Model # WERP4120PQ1. The problem is that the range blew a fuse and once replaced there is no heat coming from the burners when they are turned on. The light by the switch ...

Whirlpool 465 Surface Hot Indicator Light stays on all the time. The single surface hot indicator light on the glass top stays on all the time. No knowledge of the stove's history as we just bought ...

...whirlpool cleantop gas stove model # sf367peyn1. Oven works fine. The burners are electric start. The front burners barely light. The back burners light with assistance. I have purchased replacement ...

...burner switches in the off position. Oven indicator light works perfectly. This is the original built-in range/oven installed in our Sun City Arizona Condo. I can get all of the stainless steel trim ...

...indicator light for the range top will not turn of when the burners are all in the off position The model number given is for a wall oven so I'm a little confused about the question. If you have ...

...whirlpool electric range do not work The burners and the oven do not come on. The stove lights indicate the burner is on, but there is no heat.Stove is about 3 years old. They may just be loose,try ...

...oven heats up to proper temperature and then quits heating. Temp indicator says the temperature is correct. Burner lights and then after multiple clicks, turns off. It sounds like you may have a ...

whirlpool electric range oven broiler not working I have a whirlpool RF111PXSQ electric range. Oven element stopped working, we replaced it but it still doesn't work. Broiler and all burners work. The

Whirlpool RF378PXG indicator light stays on The1 of 2 red indicator light located at the back panel stays lit even thou they are not on. All 4 burners turn on when I turn the knobs. it is most likely ...