Question about WD-60638 DLP TV
...wd 60638 dlp but now I have a flickering picture put old lamp back in picture does not flick at all! Sounds like a new lamp that is generic (not Mitsubishi) as the set does not know which lamp is in ...
WD-60638 COLOR WHEEL PROBLEMS Usually the wheel is not available except with a Light engine. Hi How i can change color wheel of Mitsubishi WD-60638 Please guide me Thanks [email protected]
Question about WD-60638 DLP TV
...wd-60638 tv and now i have a picture again but it is fickering and greenish tint to the screen The screen is showing up again now that we have changed the lamp but like i said it is flickering almost ...
lamp blowing Lamp1 6 weeks (fluke?). Lamp2 26 months. Lamp3 2 months. Lamp4 7 weeks. Have put lamp5 in tonight. Should I be looking for some other problem before lamp5 goes out? Any obvious issues? ...
Question about WD-60638 DLP TV
...WD-60638 bought it new 3 or 4 years ago it hardly gets used this week the colors all have seem to have went bad the green is really green and green where it really shouldnt be and the reds are more ...
Question about WD-60638 DLP TV
replaced bulb tv worked for 2hours then shut off now i have only sound an yellow light keeps flashing U May have a circuit board problem, I had a RCA.. A large tv also and it would come on and shut ...
Question about WD-60638 DLP TV
Replaced lamp. Powered up TV,, after 6 minutes picture started to blink. Cleaned dust out of the two muffin fans that were visible. I also cleaned the cooling fins aft the smaller of the two fans. Pow
Question about WD-60638 DLP TV
...wd-60638 and there seems to be a oder, what could it be just replaced lamp and seems to have a burn like smell, what could be the problem Hello, did you touch the face of the lamp? If you did, you ...
Question about WD-60638 DLP TV
My WD60638 has a couple of white dots on the screen, what causes this and how can i fix the problem if its a dlp tv most likely the dots are from.the bulb if its an lcd tv your screen may not be of ...
Question about WD-60638 DLP TV
...WD 60638, I have replace the bulb in the past and the problem would be fixed. I'm getting an error code of 6 blinking red lights and 1 orange or yellow light, can you help? Below is a link to the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions