Question about K8V-SE Motherboard (MBASK8VSE)
...data+2 ground and vcc wires where do i connect these and what order You can download the manual from this location http://dlsvr01.asus.com/pub/ASUS/mb/sock754/k8v_basic/e1529_k8v.pdf Go to page 1-21 ...
...VCC -DATA +DATA GND NC (USB1) VCC -DATA +DATA GND NC (USB2) And usually one of the NC pins is no pin as some USB cables have that pin blanked out to ensure you connect them the right way. Note also ...
...the board there?s 4 point to weld with these names (in order from left to right): D-, D+, 5V, GND Many, many thanks +Data Green 3 -data White 2 VCC Red 1 GND Black 4 BLACK BLUE BROWN are used as ...
...data signal (LSB) 24 Vcc +3,3V or +5V (see below) 25 B1 Blue data signal 26 TEST - (do not connect) 27 GND 28 ENAB Data enable signal 29 B2 Blue data signal 30 GND 31 B3 Blue data signal (MSB) ...
...DATA, MIC VCC, GND) If you could tell where to hook them on the motherboard would geatly help. Thank You so much. Here is your front Audio guide: http://www.fixya.com/uploads/Images/3C3CD07.jpg Here ...
...Data + for USB port 1 (top) Vcc 8 +5V for USB ~Both~ GND 9 Ground for USB port 0 (Bottom) Black Ring * 10 Left Speaker Ring & RS Terminal * GND 11 Ground for USB port 1 (top) Tip * 12 Right ...
Question about ECS A780GM-A Motherboard - AMD 780G, Socket AM2+, ATX, Audio, Video, HDMI, PCI Express 2.0, Gigabit
...vcc=5 volts, -D=data negative, +D= data positive,GND=ground. look in the manual for usb connection, if the mainboard has the header connection for them connect the wires to it if not just leave them ...
Data, GND, MIC VCC (power), Ear R with an extended Ear R, and Ear L with an extended Ear L. The manual shows HD front panel as MIC2-L, GND, MIC2-R, ACZ_Det, Line2-R, Faudio_JD, GND, Line2_L, Faudio_JD
Question about PS2 Dual Shock 2 Controller (PrePlayed) (PS2PRSODUSH2)
...Data 2 CMD Command 3 +7.6V Dualshock and Dualshock 2 uses this for powering vibro-motors. Voltage on PS2 is 7.6V, however many sites says it's 9V. But it will work on 9V too. 4 GND Ground 5 VCC Vcc ...
Question about P67A-GD53 LGA 1155 Intel P67 USB 3.0 ATX Intel Motherboard
...vcc/data +/data -/gnd cable from front panel. have a USB cable from panel and a four pin vcc/data cable. Assume USB cable to the JUSB Socket(marked red) but where does the four pin vcc go? It works! ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
