Questions & Answers for: tv humming dlp

...dlp tv 1st I lost picture & all 3 lights flashing with a loud hum, manual suggested lamp replacement, I replaced the lamp & fan thinking that would stop the hum, then I still had the hum or roar but ...

...that seemed like where the noise was coming from. I purchased a new wheel online and replaced it myself... ..no more humming, the picture is great and now I can listen to the movie again...not the

...tv has been humming everytime it is turned on and then stops when it is turned off. The DLP lamp has been replaced about a year ago and besides the humming noise, there is nothing wrong with the tv. ...

...tv, there is a humming sound and no picture. The TV turns itself off and on 3 times and then turns off and give a 3 blinking light code with the power button. This code indicates the Lamp is bad. The ...

...a 51 inch.samsung dlp tv it has a good pic and sound It has a hum or a buzzing i thought it was the lamp humming but dont really know the humming usually means the Color wheel bearings are going

...tv. There is no picture or sound and a load humming noise is coming from the back of the tv power supply is bad and DLP light bulb bad. Sorry! bunch of dough! Need pro help at this time. please ...

TV humming noise We have a samsung dlp tv and have never had a problem with it until now. It is making a deep humming noise. Can you tell me what could be the cause of it. Yes of course, it seems that

...tv. Picture is fine, but it has a loud humming sound. Does anyone know what it is or how to fix it?? turn on video mode if loud humming still occurred replace filter capacitor on audio section from ...

...humming noise. Turning TV off for a few minutes will stop the noise but it always comes back. How do I fix? I would start by checking all the cooling fans to see if one is dirty or possibly

...TV for a half hour or so at a time, as I have a new LED LCD in my room. ... Other than that, I can't figure out what might be causing it. .... a humming high pitch sound, it will be an issue with the ...