treadclimber then it poped up with an E1 error code. We made sure connections were tight and we pulled out the speed sensor wire in the red rubber cap and made sure it wasn't wet or dirty. Re-inserted
treadclimber tc1000 from bowflex and the treadles will not engage when turned on...replaced all the io cables and checked for voltage to the mother board....please help TC1000 from Bowflex, works okay
started to decrease on its own and then the machine stopped and E1 error message flashes. Turn on and off and reset does not solve. I have only had this out of the box 1 day. get your money back quick
i have a treadclimber 1000 and it will not start. it is showing an error code e1. can you help plse? gg call bowflex and get a return authorization fast
...jumper wire from the speed sensor over to the wiring harness. there is another, unused, wire that could have been connected by accident. The E1 error means the console isn't sensing the belt
...E1 when we try to turn it on. There is no sound or any movement. I don't know where to start. Help. hi ur treadmills speed sensor have some problem. pullout it clean it and then refix it. also check ...
e1 error code hi, You have to check the speed sensor inside your machine. There will be two wire from the control board to the lover side of you machine. At the end of that wire you can see the speed ...
error codes will differ between makes and models but could be e1. http://www.youtube.com/watch?v=TquYcOzGIw4&feature=related http://www.youtube.com/watch?v=9G4MZh8JO2Q http://www.youtube.com/watch
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions