Questions & Answers for: tray load plain letter

tray 1- load plain letter Hi I have a problem with my HP 4100n. When I try to print I am getting the message...tray 1 load plain letter. I have tried a cold re-set, have checked printer preferences on

...Tray 2 as plain letter. Specially when you specify from what tray/paper type to print. This can be easily configured from the Printer Properties within the Printers and Faxes section of the Control ...

...Load unused plain white paper into the input tray, and then try the alignment again. 2. In the HP Solution Center, click Settings. 3. In the Print Settings area, click Printer Toolbox. NOTE: You can ...

...Load MP Feeder Letter message. I can't clear what to do? MP Feeder refers to Multi Purpose Feeder or Manual Paper Feeder or just plain bypass feeder. There should be a door that folds down to gain ...

...1 but it is loaded with paper already. Nothing outstanding in print queues. Any advice please? Thanks in advance.. It probably wants you to load paper in the multi-purpose tray or pull-down bypass ...

...TRAY 1 LOAD PLAIN PAPER, USE PLAIN EXEC INSTEAD? THE PRINTER IS LOADED WITH 8 1/2 X 11 LETTER SIZE PAPER. You have the settinigs on the printer wrong. There are two things you need to do: 1. Open the ...

...load manual plain letter message In most cases if the printer is asking for an unexpected manual feed it is because the paper tray is not set to the right paper size or type. To set the paper size to ...

load tray plain, letter Error shows by printer You need to go into the paper setup on the printer and make sure that it is set for plain letter. The error you are getting is your printer thinking it ...

...Load Tray 2 with only U.S. Letter or A4 plain white paper. Slide the paper guides in so that they rest against the edges of the paper. Carefully reinsert the tray into the printer, and then push the ...

...tray set for plain paper letter size the printer will default to whichever tray has letter plain paper installed. You should also check your print driver default settings to ensure that tray 2 is set ...