Questions & Answers for: suzuki marauder 800 specs

How to remove and replace front wheel I am after instructions on how to do this jack bike up tie down back of bike, remove pinch bolts, remove axle bolt pull front tire off put back on in reverse ...

runnin rough my bike keeps busting up at 3500 rpms but u can pull the clutch in and rev it up all day long till u put it under a load .i have already put the carbs in synk and didnt help anything, do ...

What is the specs for the fluid that the forks use I had to have my forlks worked on, in need to know What is the exact specs for the fluid that I need to put back in the forks?? Also, can you use ...

2000 marauder leaks gas out of overflow tube on the carberater only when starting or running the floats in the bottom of the carb need adjusting the are to low When setting the float level be aware ...

torque specs on a suzuki vz800 head bolts 2000 suzuki marauder vz800 Changing rings in head need to know the foot pound pressure on 14mm head bolt and on 10mm head bolt?

changed cam, crank and the piston still hits the exhaust valve its in time by specs what is the problem and/or the cure check for carbon build up in the valve seat to assure it is seating properly. If

Suzuki Marauder 800 The head light is on both front blinkers and Tail light is on are the rear blinkers suppose to also be on? your bike is a grey import with us spec's on the European bikes the bikes

how do i adjust valves and what is de spec for intake and exhaust valves? on what, if you do not tell us what machine well your not going to be lucky.

...Suzuki Marauder 800 use Suzuki VZ800 Marauder - Motorcycle Specs www.motorcyclespecs.co.za/model/suzu/suzuki_vz800_97.htm Suzuki VZ 800 Marauder. Year. 1997. Engine. Four stroke, 45°V-Twin, SOHC, 4 ...