...the feed dog switch and saw how to lower. did this but now they will not raise even though i work the feed dog switch back and forth. help don't know how i did it but it is working now. thanks
Question about 8280 Mechanical Sewing Machine
Singer, you don't actually raise / lower the feed dog. Instead you attach a "darning plate" (which should have come with the machine) which covers the feed dogs so they do not come in contact with the
Question about 8280 Mechanical Sewing Machine
Singer Sewing Machine model #2638 Does not feed fabric Feeder teeth move but does not feed. Teeth do not raise, to low how do I raise them so macine will grab fabric Here is a link to page 22 of the ...
Question about Quantum XL-1000 Computerized Sewing Machine
...raise the feed dog on Quantum XL 1000 lowered feed dog for free motion sewing, now can't raise the feed dog If I remember correctly you have to raise the feed dog then turn the fly wheel 1 ...
My fed dogs will not lower and raise. How can I fix it Are you having a problem with the lever itself, or the feed dogs?
...feed dog control is at the BACK of the machine; if it's the same as others of that type, you would press it DOWN then OVER. A heads up, though--when you lower it, it's instant, but when you raise it, ...
singer ! How do I raise feed dogs ??? According to the manual, there is an accessory that covers the feed dogs. (Shown as an accessory on page 4.) So the feed dogs should not raise or lower other then
...raise and lower feed dog singer 1425n According to the manual below, your machine is not capable of raising and lowering the feed dogs. Instead, your machine came with a cover plate that slips over ...
Question about 7430 Sewing Machine
singer 5523. Lowered feed dogs, now feed dogs won't raise I have moved the feed dog switch and nothing happens, still won't raise feed dogs Typically, the feed dogs do not raise until the machine ...
Singer 7033, how do you raise the dog feed. Mine are down and will not raise to help feed the material through. How do you raise them? The feed dogs on the 7033 shouldn't drop down. This model uses a ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions