Questions & Answers for: shredder seem turn

...the shredder that has broken off. The teeth on the plastic gear that turns the massive metal gears that turn the shredder teeth is probably stripped and needs to be replaced, if you can find the

...shredder Shredding is sluggish. It seems the motor is working really hard to just shred one piece of paper. Also what it does shred doesnt seem to fall down to bin. I have to stop shredding turn off ...

I have a Techko SH51505 Shredder that runs, but the shredder mechanism does not seem to turn and shred. Can this be fixed? Sorry, no spare parts are available

shredder. Power is on, and it sounds like it is on, but the blades do not want to seem to turn, despite being cleaned out of paper. Any advice would be most appreciated!!! you have 1 or 2 broken drive

...seem to "sense" that a paper is ready to be shredded. We do oil regularly. Shredder, Destroy It 4000 You dont say make or model so...get some shredder oil into the cutting teeth where you insert the ...

...shredder will not shred, but the sensor light lights up. Power is good, since the sensor light turns on when you touch the entry point. However the motor wont turn the blades or even seemingly power ...

...shredder still crosscuts, but it seems that the middle is not working. All of the shredded material seems to accumulate in the middle. I turned it over and cleaned it out, but it happens again and ...

shredder Turn the top unit over to reveal the 'teeth' With a pair of needle-pointed pliers or cosmetic tweezers gently pick out the pieces of paper that you can see. You'll probably notice

...shredder to work, however he seems to think the clog is at the top side of the motor unit. How should he proceed? Turn the shredding unit over to expose the mechanism from underneath. Remove all ...

Shredder not working, blue light is on, shredder sits on top of trashcan motor turns in reverse seems they always fail in forward first . Plastic gears wear out and none of the mfg's make replacement ...