Questions & Answers for: sharp vcr power light blinking

Question about Televison & Video

5 Answers

...Sharp vcr/tv in her room. When I went to turn on the tv it wouldn't work, after trying multiple things I realized the tv was blinking tamper proof. My boyfriend and I couldn't figure it out, and of ...

Ad

Question about Televison & Video

1 Answer

Sharp TV. Thanks MANUALLY ENTERING CODES 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program. 2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT

Ad

Question about Televison & Video

1 Answer

...Sharp 13" TV/VCR combo, Model # 13VT-R100. Have you tried switching inputs? On some sets if it is set to s video all you get is a dark screen. Check your connections if you have other inputs. If you ...

Question about URC-3021 Remote Control

1 Answer

sharp vcr vc-h810 need the right code for my sharpvcr vc-h810 The codes to use for a Sharp VCR and a URC-3021 are 0048 or 0807. To setup your URC-3021 for the VCR, these are the steps: 1. Turn on your

Question about 13VT-R100 13 in. TV/VCR Combo

1 Answer

...Sharp 3 in 1 combination. When I try to turn on the tele by remote or physically puching the power button on the tele, a red light blinks under the label of "Tamper-proof". I have left the tv ...

...Sharp DVD Player DV-S1U You can power scan for the code. Turn ON the electronic device you want to program the remote to control. Press the Mode button( sat,tv,dvd,aux) on the remote until the ...

Question about VT-G14 14 in. TV/VCR Combo

1 Answer

key led is blinking i have a 40 inch sharp tv an the red light keep blinking, the power light,it will come on with the gren light abount on for 1 minute then go off no picture.help

...sharp flash code to fine out whats wrong The power supply has failed due to a short-circuit and has placed the whole unit into protection mode. My guess is that some electrolytic capacitors have ...

Question about VC-H810U VHS VCR

1 Answer

...sharp and the recommended service people. Can anyone tell me how to fix this myself? Blinking red light signals that the power source is in protected mode becuase another  part has failed ...

Question about AQUOS 52" Flat-Panel LCD HDTV

2 Answers

...power cord is firmly connected to the wall and the TV. Make sure that the cables connecting the TV to the various video sources (cable, set-top-box, DVD player, VCR, etc.) are all firmly connected. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...