Questions & Answers for: set 12 hour time

...12 P - depending on thte time you want to set the A is for AM and the P is for PM hope this helps jeff press mode 3 times. to set minutes press lap/reset and adjust minutes by pressing start/stop. ...

...12 hour clock is set to AM or PM. Good luck. Here's how it works on my si 686.

Push the mode button twice to enter the "set time" mode. Once the current time is blinking, advance hours by ...

...clock to 24-hour format: 1. Press and hold the CANCEL and Delay pads for three seconds. 2. Press the More+ or Less - pad to select 12 or 24 hour. 3. Set the time of day following the directions ...

...2 12 hour time To set AM/PM (12 hour) or Military (24 hour) time - With the system off, hold down Alarm Setup and press On/Off to switch between AM/PM (12 hour) and Military (24 hour) time

...set the year, month, date and day and whether to use 12- or 24-hour time for your watch. 6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in ...

...12 hour clock. To set the clock, use the 1-4 buttons to set the hours and minutes. Hope this helps. Here's how it works on my si 686.

Push the mode button twice to enter the "set time" mode. ...

...12 hour time currently set on 24 hour time setting 1300,1400 & so on want to change to 12 hour standard time setting. Mate here's the link for Timex Indiglo instruction manual.... ...

...12 hour time. How do I change time from 24 hour to 12 hour settings? Google is your friend in such cases Google make model manual Here are a few to be going on with How do change time from 24 hour to ...

12 hour format is set as the default. To change the 12/24 hour time format, open the CONTROL COMPARTMENT COVER on the bottom of the clock and adjust the 12/24 TIME FORMAT switch to the desired format.

...12 Hour Format Is Set As ... To reset the 24-hour time to 12-hour time on a Brookstone alarm clock, press and hold the "CLOCK ADJ" button until the time display flashes. Then, use the "HOUR" and ...