20 Most Recent Casio Wave Ceptor WV57HA-1AV Wrist Watch Questions & Answers

My Casio wave ceptor keep resetting itself like this when the bottom right (D button) is pressed. I need to make sure I reset the city code or before trying to receive as it defaults to Tokyo. Press & hold the top left (A button) and date changes to city code. Scrole through codes using right bottons.
Hope this helps.

Casio Wave... | Answered on Jan 24, 2017

I had the same problem this week and after downloading and reading the operation guide, I found the "adjusting the home positions" procedure in page 2, I followed the instructions and now my Casio 4303 is up and running, I got the operation guide from: http://ftp.casio.co.jp/pub/world_manual/wat/en/qw4303.pdf (thanks to jeffw284 for the information).
I hope this helps to solve your problem.
Best regards.

Casio Wave... | Answered on Dec 14, 2016

You can align the analogue time with the digital time by pressing the mode button until you reach the hand setting position (HS) and then press one of the right hand buttons to change the hand position.

(Check out this with the instructions- it is all there!)

Casio Wave... | Answered on Dec 14, 2016

Follow instructions. Just poke pin in at right angle.

Casio Wave... | Answered on Aug 01, 2016

mcdevito75 here, 1 of the buttons should say MODE, press this button and see the display blinking, NOW! press the set button for each function, after each function is set press MODE to move onto the next function, when all functions are set, press MODE again to see steady display.

Casio Wave... | Answered on Nov 15, 2015

I tried putting your module number in (3054) and was able to download the instructions.

Try the following link http://ftp.casio.co.jp/pub/world_manual/wat/en/qw3054.pdf . This was successful in finding the manual you require.

Good luck and a happy new year.

Casio Wave... | Answered on Sep 11, 2015

I take mine to a watch dealer to get the right, freshest battery from someone with the right tools to install it. Peace of mind.

Casio Wave... | Answered on Mar 03, 2015

you only have to set it to real time.

Casio Wave... | Answered on Dec 30, 2014

The Casio wave scepter watches often got put on sale because the booklet was thick and the sales staff inside their steel shell stores could never prove how it worked. I bought 3 from Sears at a low price.
Ok, I am in northern ontario, and I set the watch around a non metal tube or box - like a paper towel roll or small pop bottle and set it on a south or west facing window ledge. Works best on a top floor. Position the watch so the 12 is pointing to Fort collins.
My casio at this distance doesn't pick up the radio signal until sometime between midnight and 6 am. It has a setting that reveals if it did sync and reset the time, and will show at what time it sync'ed.
casio watch manuals are available online. As long as you have set what time zone you are in, it will set the time.

Casio Wave... | Answered on Dec 11, 2014

Actually this is a simple procedure for a watchmaker or a person that changes alot of batteries, you don't need to send it anywhere, for the price of postage you can get someone to reset your watch, It is not actually a button but a spot on the circuit board that is shorted with tweezers to the positive side of the battery. This procedure is usually done when you install a new battery.

Casio Wave... | Answered on Aug 29, 2014

Not finding what you are looking for?
Casio Wave Ceptor WV57HA-1AV Wrist Watch Logo

366 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Jimmy Accardi

Level 2 Expert

101 Answers


Level 3 Expert

7993 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ceptor Casio

  • Ceptor Casio

Most Popular Question

oh one additional thing about casio wave

  • Watches