...pulley away from the serpentine belt, allowing the belt to have slack, and then the belt is slipped off of one of those pulleys. Release the pressure slowly, remove the tool. Then the serpentine belt ...
...pulley away from the serpentine belt, so that you can slip the belt off of one pulley. Then you release the arm slowly so that it is fully extended. Since you now have the serpentine belt off of one ...
Question about Serpentine Belt Tool & Accessories - Expanded Model
...Serpentine Belt with an Automatic Tensioner: a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on. b. Using the Diagram: ...
...Serpentine Belt with Tensioners: a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on. b. Using the Diagram: Install the ...
...Serpentine Belt with an Automatic Tensioner: a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on. b. Using the Diagram: ...
...Serpentine Belt with an Automatic Tensioner: a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on. b. Using the Diagram: ...
...pulley. Step 4 Remove the serpentine belt from the other pulleys and pull the belt out of the engine compartment. Step 5 Slide the new serpentine belt into the engine compartment and around the ...
pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last
...serpentine belt routing diagram. Leave the belt tensioner pulley for last. 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt ...
...wrench. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly. Fig. Accessory serpentine belt routing-3.5L engine Fig. Accessory serpentine belt (A) routing-3.8L ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions