Questions & Answers for: samsung tv high pitch noise

TV makes high pitched noise Hey there This is a problem similar to the one below but i have more details to add I noticed after a recent move my TV is making this horrid high pitched noise. After ...

Samsung makes a high pitch sound as soon as I turn it on. The pitch stays the same despite of different volume settings. It annoys the heck out of me. Second problem has to do with the picture quality

samsung slimfit television 30" high pitched noise. If unplugged for a few hours it will go away but comes back after about 45 minutes In this model the horizontal drive coil vibrates and makes a high ...

...high freq sound comes from TV. Not through speakers, volume adjustment makes no difference. Not there all the time. Any ideas? Thanks. TV's have a number of devices called coil (coils of wire) that ...

...TV almost unwatchable. I contacted a repair place from Samsung's website. I was told that is likely the flyback transformer. I don't know what it is, but it sounds cool like a flux capacitator. I was ...

TV. If a noise persists for a while, it is the fan. You can order part (samsungparts.com) and replace yourself. Also, check this out: http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel

...Samsung HLM5065W has a high pitched noise eminating from the set. This is independant of any channel signal or external device connected to the set. It also appears worse when first turned on. ...

...samsung hlp4663wx/xaa tv. It also has True surround XT.It sounds to me like a bearing in a fan motor going bad..It has a high pitch noise and doesnt always do it.The picture is fine but the noise is ...

...samsung neo 32 inch picture tube tv. When I turn it on there is no picture or sound, but there is a light high pitched noise. That high pitched sound is likely the Horizontal Output section trying to ...

...Samsung TV that turns on but turns off after cycling picture has lines up and down and a loud high pitch noise comes out The TV has a chip that check to see if the circuits are OK before turning on ...