...s10 pickup truck will not shift from 3rd gear to overdrive automatic transmission 1st, 2nd and 3rd gears are ok I was coming home from work and passed a car and it just would not go to overdrive need ...
S10 Chevy Blazer 4x4 with a 4.3 vortex, and my problem is that when I go on the road, it shifts from 1st, 2nd, 3rd,..gear before I even go 20mph.... Have the transmission governor checked the trans is
...S10 Chevy Blazer 4x4 with a 4.3 vortex, and my problem is that when I go on the road, it shifts from 1st, 2nd, 3rd,..gear before I even go 20mph.... My transmission is automatic. check your flywheel ...
all gears gone. only 4th gear works. Putting my 3rd manual transmission into a 1988 Chev S10 2.8v6 4x4. Whats the problem with this tranny? Is there an upgrade? Try adjusting the Shift linkage
...shift fine. 3rd and overdrive slip but still work. The fluid is not burnt. Any solutions? i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse ...
...s10 4x4 4.3L manual transmission works in all gears but 3rd. will not shift into 3rd gear. Hi: Your transmission has 3 shift rails... 1st - 2nd 3rd -4th 5th- Reverse If your 3rd gear doesn't work , ...
...s10 2.2 liter and when my transmission shifts from 1st to 2nd gear it hesitates and shifts hard 2nd and 3rd shifts fine what could be the problem. a number of issues. Tcc regulator bore worn out, the ...
...S10 4wd Blazer with automatic trans. will not shift properly. When put into drive it will not go into the lowest gear but seems to to be in the highest gear. You can manually put the lever into first ...
Question about 94 95 96 97 Chevy S-10 S10 Pickup Billet Grille Grill
S10 Chevrolet pickup truck 1995 will not shift gears how can I fix it This is most likely going to be a transmission problem. You will have to have this diagnosed first by a shop. Should be about 80 ...
Question about 94 95 96 97 Chevy S-10 S10 Pickup Billet Grille Grill
...98 s10 it seems to start out in 2nd gear and only shifts to 3rd I have changed the transmission out and it’s still doing the same Did you use the same passing gear cable, also you Pc controls ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions