Questions & Answers for: roller brush light keep coming

...roller turns free. if it does the belt is broken. turn the handle on front of vac. turn latch under headlight and remove head. open bottom plate and return handle to normal position. belt and brush ...

...problems with the brush roller spinning. Is there a part missing possibly? The suction is great through the hose otherwise. Thank you a friend helped me find the problem. It was actually very

brush will turn if the vaccuum is tilted up. The belt is not broken either as I have checked it. What could be the problem Does it smell like anythings burning if it's on for a while? It could be that

Roller brush not spinning? I own a Kirby Heritage II vacuum...I just got it back from a motor and fan repair and now it seems like it has less power. The roller brush is not spinning and the little ...

side of brush bar out to clean it and not sure if i put it back in properly. You need to clean your roller and replace the clutch assembly that drives the belts. poorly designed vacuum with many flaws

just looking to see if worth repalce roller or just looking to see if worth repalce roller not the brush the actual rollers or buying a new vaccuum just look to see if you can get the rollers replaced

...brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance. First things first lets focus on the brush roller. Unplug the vacuum and turn ...

...brush roller freezes and indicator light turns red turn on power, brush roller light comes on green and brush starts to roll for about 3 seconds and than brush freezes and light turns red try turning ...

...on my vacuum nothing happens...is it shot or what can I do? as in no pwer  change fuse      brush roller not revolving  check drive belt and replace with new if ...

...roller brush assembly installed. Once the end is put on the suction tube it runs for a couple secondes and then shuts off. Any suggestions? Possibly a blockage in the brush assembly. motor is going ...