reset the timer after I have installed a new lamp. Can you help me? Thanks! Tracy I was wondering if you could tell me how to reset the timer after I have installed a new lamp. Can you help me? Thanks
...lamp time reset procedure is complete, the screen will display "LAMP TIME WAS RESET TO 0." When the lamp time is reset, the LAMP indicator will go out During the installation of new bulb make sure ...
reset the lamp timer. modelpt-56dlx25 how does one reset the lamp timer. model: pt-56dlx25 Panasonic Lamp timer reset. To reset the lamp timer For the full instructions and how to reset the lamp timer
...Lamp timer reset. For the full instructions and how to reset the lamp timer go to the following site http://fixyourdlp.com/wp-content/uploads/2007/09/panasonic-tyla1000-lamp-instructions.pdf I hope ...
...and you will get the message "Lamp timer has been reset to 0. Your welcome :) Push and hold the volume button to 0 on the tv at the same time push and hold split button on the remote for about
...and split button. Should I unplug the tv and redo the lamp? Remember vol down on tv and split button on remote at the same time for 10 sec until you see a message saying "lamp timer has been
reset lamp time on panasonic hdtv pt-56dlx25 after replacing lamp? Hi there To answer your question; Hold the volume down on the tv set and the 0(zero) button on the remote for more than five seconds.
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions