...drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and hold down Go button for about 4 seconds until al the LEDs light up. Once all 4 LEDs are lit, ...
...reset and the drum light is still on. I did this again and the light is still on. Costly as that was I bought another drum and toner and still the drum light is lit! I really do need help with this ...
...reset the drum and page counter after changing drum & counter, instructions in handbook says the reset instructions are with the new drum, they are not. Reset the drum counter as follows: Open the ...
Question about HL 5250DN Laser Printer
...drum, if you have a new drum, just open the front door and hold the go button til all lights flash and the drum is reset. Press the go button 3 times and it will print a sheet showing the drum
Question about HL-2240 Monochrome Laser Printer
Brother HL 2240 ready light it on, call for print but nothing happens. if you press the GO button 3 times very quickly (1-2-3) and you get a printout from the printer then the most likely reason is ...
...light is blinking but nothing is happening Have you tried pressing the GO button to reset the device? I had a similar problem, found this manual and it helped me, check out the troubleshooter ;) ...
...light keeps blinking I suggest You Go to Official BrotherPrinter Page For You Brother Printer Problem On Below Brother forum URL Link: Brother HL 2270DW FAQ Troubleshooting United States OR In Case ...
Question about HL-2240 Monochrome Laser Printer
How do I reset the toner light on the HL 2240 Brother Open front cover. hold down CLEAR button
Question about Hl2240d - Hl-2240d Laser Printer With Duplex Printing - Laser Printer
...reset sequence (worked on Brother HL-5350DN) With Printer off open the toner door Hold the Go button as you turn the printer on. All lights will turn on. Keep holding Go until status light goes ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions