Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum
...replace the actuator pivot arm on my Hoover Wind Tunnel to fix the self propel feature. I can see where it needs to go but I can not seem to get the cover off the vacuum so I can get to it. How do I ...
...handle if the pully is tangled in the belt somehow this would be your problem. In this case remove the belts and re-install them (vbelt should feel way too loose) If the pully will not travel it is ...
Question about U6446-900 WindTunnel Bagged Upright Vacuum
...replace with new one. how does one access to remove the foot pedal latch. By foot latch, I mean the foot lever that releases the upright to lower the handle and begin vacuuming. it is accessed from ...
Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum
handle, can it be repaired, replaced with a better one, plastic breaks too easily? The pedal release can be replaced but the base will need to be checked for cracks as well. if the base is broken most
Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum
...replace handle release lever on hoover model U6445, s/n 039900015686 From under the vacuum, there is a tab release that you need to pry out the old part. At this point, based on your serial nuimber, ...
Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum
...replace the handle-release lever on a Hoover model U8125-960 Vacuum cleaner The exploded views at this URL will help you identify the part and you will be able to order it as well. ...
...replace the handle release lever on the hoover windtunnel 6425-900 The release lever is held in place by tabs molded into the base. You just need use a screwdriver or two to press the plastic tabs ...
Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum
hoover model U6425-920 falls backward This has been a good machine. Lately it has not been latching in upright position. Now it wants to fall backwards when you let go of it. What parts should I order
Question about U6630-900 WindTunnel Bagless Upright Vacuum
...hoover windtunnel handle release lever This part is broken on my vacuum. I have the replacement part, but can't figure out how to remove the old part so I can install the new part. Tilt the ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions