Questions & Answers for: replace clutch 1994 suzuki

...1994 suzuki dr650 rse,it has grating noise on starting and switching off! When starting happens to be blocked and I try again and he starts normal. Thanks Sounds like the starter motor clutch is worn ...

Ad

...replace your clutch plates, do not use fully synthetic oil, ever. Get the slave cylinder repair kit from Wemoto and stop your clutch dragging due to that. That's about it. Nothing else goes wrong on ...

Ad

can u adjust the clutch and whats kind of fluid do i use to top it off on my suziki intruder 1400.96 If you are having trouble releasing the clutch - you probably have a fluid problem. Remove all ...

...slips. what are some possible reasons? gear selector is worn, replace. Change your oil more frequently and adjust gear lever to suit you so you make better changes. Don't downshift without the

Question about 1994 VS 800 Intruder

1 Answer

...plates or bucket is worn it will cause slippage. If you pull in the clutch and it disengages but starts to re- engage after a short period you will need to replace the clutch master cylinder

...1994 Suziuki Sidekick that I'm replacing the clutch and transmission on and I cannot find the torque specs for the flywheel. Hi Mouthtrick, Set them at 78nm. Use a dog tooth tool mounted where the ...

I have a 95 gsxr 750 I just replaced the friction and steel plates I pull the clutch in in N and if I pull the clutch and put it in gear it jumps and stalls the kickstand wire has been cut idk ...

...clutch switch of 1992 suzuki intruder Not adjustable attached to the underside of the lever, remove from clutch some switches are cliped together in 2 halves & will split in half if you release ...

...1994 Suzuki Escudo 2 Litre. The gears are very hard to change and It grinds whenever i put it into reverse gear. Could this be resolved with a simple gear oil change or is the p nomad escudo 2 litre ...

Question about 1994 VS 1400 Intruder

1 Answer

...clutch piston went out. part cost $85.00. how hard is it to put one in? very easy to replace...usually not the piston though, just the seal which is much cheaper...Here is a free manual to tell you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66975 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...