Question about 1986 GV 1400 Cavalcade GT
...remove the seat correctly. Two bolts, one either side of the lower rear of the seat, you have to remove both lids from the saddlebags (panniers) to gain access to them. Once undone, lift the rear and ...
Question about 1986 GV 1400 Cavalcade LXE
...Remove the seat, false tank, handlebar/clock adjust buttons cover, vent cover around the steering, right inner fairing cover, windshield, dash cover. Then you have access to the Reg/Rect. The wiring ...
...cavalcade? Easy answer, NO. But there are 3 things you can do but they are not easy. 1, if you take to the seat and lower the foam in the seat, you can make it lower. 2, you can lower the front froks ...
...remove the seat on my 87 gv1400 Remove the saddlebag lids, undo the 2 bolts just behind the shocks, one on each side of the seat. These are the only bolts that hold the seat on. Lift the rear of the ...
...Remove the seat and forward rear wheel guard portion that is under the seat. The fuel pupm can be operated by pressing the starter button only, if your clutch safety switch has not been bypassed. If ...
...seat, instrument cluster cover. The Stator is located on the left side(sitting on the bike) of the motor. You can change it by lying the bike over on something soft, old mattress or the grass, on the ...
...remove the False tank, seat, handlebar clamp cover and vents around/under it. Order a new one from www.cademaster.com and follow the path of the existing one back to the left side of the carbs, fit ...
...Remove the left sidecover below the seat and it is towards the upper rear portion uncovered. Join the worldwide Yahoo email group vis www.suzukicavalcade.com to help answer any otherproblems you may ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions