Questions & Answers for: remove glove box lock dodge

Question about 1993 Shadow

1 Answer

...to know where the blower motor is located in a 1993 dodge shadow thanx pullapart the glove box and it should be right behind it if not there check under the hood passenger side on the upper

Ad

Question about Garage Door Laser Parking Guide

1 Answer

...remove the glove box lock form a 1962 corvette? How do you remove the lock form a 1962 corvette glove box door? mcdevito75 here, Remove the lock from the glove box. If the glove box is closed and ...

Ad

...remove the glove box on my dodge caravan 2001 open the glove box door, remove everything from inside the glove box. remove the clip retaining the door-stop strap. pivot the glove box downward,unsnap ...

the glove box door and look inside. to remove the blower motor you will have to remove the glove box door and the lower half or the instrument panel to gain access to the heating/air conditioning unit

...glove box. Remove all items in glove box. remove glove box from dash and to the left of the blower motor you will see a electrical plug, remove the plug and the resistor mounting bolts. remove the ...

Question about 2004 Caravan

1 Answer

the glove box. 4.There will be two pig tails (one vehicle harness, one resistor), remove pig tails, remove two screws to free resistor. 5.Replace resistor, reverse removal procedure. Done!! Take care.

Question about 2000 Grand Caravan

1 Answer

heat resistor in 2000 dodge caravan the blower motor resistor should be right behind the glove box. Remove the glove box, unplug the connector(s) and remove the two screws (9/32" socket usually works)

Question about 2000 Grand Caravan

1 Answer

...remove the glove box there are a few clips when you open the box use a small screwdriver and prise out these clips the inside of the box will come out if its just the lock there should be screws ...

...remove the glove box in a 2003 Dodge Caravan? open up glove box and push in the sides by the stops and it will open up completely. there is screws that hold the medal bracket that is attached to the ...

...an inch or so Sounds like the locking / latch mechanism is either locked or broken, try to remove the glove box after removing all the screws that secure the hinges on the glove box. Hope it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...