Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum
remove the filter. The filter is for dust particles not for water I would replace your filter and dump the water out from the shop vac, Also after each time you vacuum up water dump it out of shop vac
Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum
How do you remove the filter from Rigid wet dry vac? Unscrew the 'tab/nut' at the BOTTOM of the filter and pull off the filter cartridge
use --- just remove the foam and paper filter from the inside of the unit. it is now ready for wet use. make sure you let the unit dry out before you reinstall the filters and use it for dry use. c..
Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum
remove the filter from a Rigid 4 gal portable wet/dry vac There is a black rubber cap type item on the bottom of the filter and I tried to unscrew it but it would not budge and I was not sure it was *
Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum
...Remove any obstructions that you find. Clean or replace the filter: If the vacuum filter is dirty, this can cause airflow resistance and make the motor work harder, leading to the whistling noise. ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions