Questions & Answers for: remove face plate janome

Face Plate) and where the shaft comes through the body is where to look, move the handwheel slowly and watch for threads....remove them gently by unwinding, be patient as they may be well jammed......

the power back on, raise the needle to it's highest position. Remove the face plate, bobbin and bobbin case. Clean the area in and around the shuttle from lint and/or threads that may be tangled there

Face Plate-there should be a plug in the middle of the door-remove gently with a small screw driver- there should be a small screw to remove-the door should come off easily--change bulb--replace screw

...Remove the screw from the top of the Janome face plate with a small flathead screwdriver. The face plate is on the top of the sewing machine directly above the needle. Pull the face plate up and away ...

remove the face plate? the face plate either has hinges at the back so you gently pull on it to open or there is a plug with a hidden screw,,carefully use a screw driver to get the plug out & then

Face Plate can be removed, of course I shouldn't do it, but I feel if I knew how to properly remove it I would be able to see what is wrong) Your machine one sensore may be damaged. call expart person

...remove the face plate on my janome 9500? Remove the cap and the setscrew. See page 102 of this manual: ...

...craft 9500 how do I remove the face plate Remove the cap and the setscrew. See page 102 of the manual: ...

...Remove the face plate. Keep the 3 parts to replace = Cap, Screw, Face plate Push and turn the bulb counterclockwise to remove the bulb. Push and turn the bulb clockwise to reinsert new Light ...

...remove the left side face plate. The screw holding the face-plate is hidden behind a button that matches the face plate. Next pull the socket out. Then pull the bulb out of the socket. Push the new ...