...(tight singletrack) and I think a baffle might be the best/easiest way.Same muffler. If you choke it up with the baffles it will smooth it out some but not alot on the bottom mostly the
Question about 2008 EC 450 FSR
...muffler. drill out or chop off with a chisel. pull out baffles. but beware it will be loud. i did this to my dragstar/v star and ended up putting them back. you could just remove some of the ...
Question about 2002 VN 1500 Vulcan Classic Tourer - Fi
...remove the baffles w/o damaging the engine Probably not. As you know or should be aware, everything on a motorcycle is there for a reason and a purpose. All parts complement all other parts. The ...
...the silencers from yamaha rd 350 ypvs f2 many thanks near the end of the mufflers there one screw remove it take pair of pliers grasp the small bar in the end of the muffler and remove the
...motorcycle engine is a finely tuned system. If you change anything on the system it will effect everything else in the system. For instance, if you remove the baffles from your mufflers, it may cause ...
...the exhaust you either need to remove the bolts in the muffler or drill out rivets. Once either are removed the process is pretty simple with pulling out the insert and removing the baffles. Good ...
remove baffles from my harley road king custom Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day. Can remove the baffles on my ...
Question about 2006 Royal Star Tour Deluxe
...to know if the existing stock mufflers have any kind of removable baffles or anything that could be removed to effect the sound of the bike or do you have to replace the mufflers entirely to change ...
Question about 2006 Royal Star Tour Deluxe
...remove baffle How to Remove Baffles Packing From Vance Hines Pipes Mufflers Louder... http://www.hardracing.com/exhaust%20systems/Micron.htm ...
Question about 2006 Royal Star Tour Deluxe
how do you use a slide hammer on the inside dia of a baffle stuck in a motorcycle muffler. I would remove the muffler and use a rod or pipe.to tap it out.
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions