needle won39;t even pick up the bobbin thread when it is threaded. I noticed the belt under the machine won39;t move, got it to move only slightly then it stops again. I have the same problem! Did
...won39;t move the needle up and down. I took off the back so I could watch and see what was going on. I can see the belt moving, but no movement from the needle. I can move the knob on the side and ...
Question about 3116 Simple
...needle up and down won't turn. What do I do? the knob to move the needle up and down won39;t turn. What do I do? Do NOT turn it but one way,towards you ONLY,it sound like it39;s just stuck.Grap ...
...won't move the needle. needle appears stuck. When it does get going, it forms a rats nest of tangled thread, or sews a nice looking thread on top, with loops and a straight bottom thread on ...
...needle won39;t. If I try moving the needle with my hand, it will move, but it won39;t keep it39;s position. What is wrong with my sewing machine? sounds like a part is damaged or jamed, the ...
Question about 3116 Simple
...needle position won39;t move from left to middle to right. When I move the dial to M or R the needle stay in the same place. Plus it's hard to move the zig zag handle. the machine may need ...
Question about 3116 Simple
...needle won39;t move up or down even though the apparatus seems to be working ok. The needle won't move up or down even though the apparatus seems to be working ok. Take it out of bobbin ...
Question about 3116 Simple
...needle won't move up or down. The motor works fine. I put some oil but maybe I need to put 10-W-40 to unfreeze it. I believe the machine was not used in a very long time. Can anyone advise? ...
Question about 3116 Simple
...needle doesn39;t move ~ the knob at the end of the machine won39;t turn at all My pfaff 1222e isn't working the motor runs but the needle doesn't move ~ the knob at the end of the ...
...Won39;t move We have a Toyota 830 embroidery machine. Last evening a needle break apparently caused a misalignment of the needle bar. That was easily resolved by manually moving it per instructions ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions