Questions & Answers for: machine embroidery top thread loose

...embroidery machine Upper tension is too loose or lower tension is too tight.This might be a good thing. It depends upon how much it is pulling the thread under. A perfect tension on embroidery is ...

...Embroidery machine thread keeps breaking No matter which embroidery thread I use, the design starts, the thread bunches up on the bottom of the fabric and the thread breaks. I have used three brands ...

...embroidery machine will show a little less than 1/3 of the top thread color and 2/3 of the bobbin thread on the bottom side of the embroidered piece. You may have to play with it some so use scrap ...

embroidery computer. I am having trouble (lots) with the thread looping on top of fabric. either try rethreading machine from beginning... or your top tension is too loose... did you switch it over? I

...top of sewing. also in areas the embroidery is so very loose that it actually comes undone. sometimes my top thread is shredding try changing the needlecheck for burrs in the needle plate area & ...

...embroidery machine. The embroidery pattern l am trying to sew has worked really well in the past, but now when it starts to sew it is not picking up the botto innovis 4000d sewing and embroidery ...

top thread tension,, if that doesn't work then try adjusting the bottom thread tension. Hi Jean, I think Debbie is going in the right direction. Tighten the bobbin case tension to tighten stitching on

...started looking loose on my embroidery Make sure that when you thread the machine, that the thread is always seated completely in the tension disks. Remove the thread and rethread from the

EMBROIDERY MACHINE, TRYING TO FIX THE PROBLEM OF BIRD NESTING. bird nesting is from needle thread tension being too loose increase the tension up Bird nesting frequently results because the top thread

...Embroidery Machine. It all of a sudden it is bringing the bobbin thread to the top and mixing with my top thread stitching. Why is this happening and how do I fix it? Sounds like your bobbin tension ...