Questions & Answers for: lip mode Vacuums

my bissell want **** up the water Make sure that where the tank lid lip and the top of the clear noozle has that black oblong gasket on it. Also make sure the filter on the tank lid is clean.

...remove the tank, there should be a black oblong gasket on the top of the clear window, where the lip of the tank sits on. If missing, no suction. Tank is not sitting right allowing a leak from the ...

electrolux 6500 sr Won't turn on. Question mark light turns on when I try. check the little button under the lip of the vacuum cleaner bag.

...to lock the top and water holder in place. That one is a little funny to get on right. There is a lip on the lid towared the front. That lip has to hook under the tank first and then pull the lid ...

...DON'T pull the plastic inner seal and outer seal apart. They snap together and snap onto the lip of the vacuum top-half. It's a bit of a struggle snapping the seal back onto the

...station is not on properly...Make sure that you have the outer (permanent) bag pushed down over the lip of the vacuum.  The docking system needs to be behind the lip also.  This keeps both ...

...Push the outer (permanent) bag down against the vacuum.  It will go over a black lip.  Put first piece of the bag dock on..make sure it is behind that lip also.  When you ...

...outer bag back on the unit.  Make sure that you have pushed the outer bag down past a black lip.  The piece that holds the inner and outer bag on the vacuum needs to be put on

...plastic assembly that hold the bag, or both? Make sure that your bag is pushed all the way past the lip on the connector tube and that the "U" shaped part of the plastic assembly is in it's slot ...

My Bissell brand new project 2x does not pick Up water. The lip on the top tank does not hook into groove on the bottom tank... Take it back.