Questions & Answers for: kwikset powerbolt 2 lock unlock

i hit the lock button and the lock unlocks. i hit the password and the door locks take off cover turn 2 pin point around

...kwikset 907 lock 1) Remove back cover (instructions usually are stuck on the inside of the back plate cover .. if not continue next ... 2) Make sure all batteries are fully secured. 3) Press the ...

2. enter your new code,, 4 to 8 digits and then press the 'LOCK' button. it should now be programmed to your new code. now if you want to add more codes to the lock -- just push the black button twice

...kwikset.com/Customer-Support/Product-FAQs/Faq/50160000000HifLAAS.aspx Step 11 says: 11. Door handing: I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do? ...

...Kwikset. Good luck! I had this problem with my PowerBolts and called Quikset and this was the first thing they recommended:
1. remove batteries
2. press reset button 3 times
3. press each of ...

...Kwikset recommends that if your Powerbolt is beeping, that you take out the batteries and remove the powerstrip. Let it sit for one minute, then put the batteries back in and wait for another minute. ...

Powerbolt . On the right-hand side under the batteries, you will notice that it says" Door Direction Jumper". If the jumper is mounted on pins 1 & 2, then move it to pins 2 & 3. Or if it's

kwikset smartcode deadbolt newly installed unlocks when lock button pushed. I have taken batteries out and reset few times with no success. deadbolt opens when lock button is pushed and locks when ...

...to the locked position. -- Kwikset Powerbolt 2 Your Kwikset Powerbolt 2 is defective. In our window system we can get more things http://fileexplorerwindows.com for the work and its so good for