97 hyundai my partners 97 hyundai is running rough , kinda like it has restricted fuel , im hoping its just a blocked fuel filter , when i change the fuel filter on her 97 hyundai coupe , do i need to
...gone bad(throw out bearing) you'll have to have a shop remove the trans to fix this i would suggest that you get a new disc and pressure plate while you are paying to have this fixed sorry but this ...
...gone bad in your tranny soon other thing will malfuntion in you tranny.now rare case you could have a dirty valve body this is worth a try change you fluid and filter clean valve body.you will see it ...
My Dashboard in my 2002 Hyundai Accent doesn't work. I've checked all the fuses and none are burnt. What could be the problem? unfortunately sounds like the dash cluster is gone bad
...97 just changed the timing belt and valve cover this afternoon and was running bad gas out, I was allowing my car to run n the yard. was not turning over at first just before it started to glow red ...
...to the dealer to have them reset the air bag if it has gone off if not it just might be a senser gone bad. the abs light is also the same way there will have to hook up to the car and reset the ...
Question about 2008 Accent
...gone bad, how can I replace it myself? SKF number FW178. (or equivalent) https://www.youtube.com/watch?v=l0LCkycUcqM DON'T leave just a jack holding the car up! It's actually on stands you can't see ...
Question about 2002 Accent
i have a 2002 hyundai accent that is stuck in 1st gear and the check engine light is on any idea what the problem is? The dash lite probably codes a sensor gone bad. It have fluid?
Question about 1997 Accent
...97 Hyundai Accent lost power while driving it last night and then wouldn't start. It tries to turn over but won't start. Anyone know what could be wrong? While trying to start it you can smell gas ...
Question about 1997 Accent
know torque specs for hyundai accent g4eh engine main and bigend torques torque hyundai accent Questions & Answers - Fixya www.fixya.com > Forum > Tags Torque specifications for cylinder head 2000
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions