Questions & Answers for: kitchenaid stand mixer spinning

KitchenAid® stand mixers that are not used very often or have been tipped may experience slight oil leakage from the shaft or hub attachment. To avoid the oil leakage, KitchenAid suggests that you run

My Kitchen Aid mixer attachement rod won't spin when turned on. You can hear the motor turning, but the rod doesn't spin. It sounds likme you may have stripped/broken one of the gears up in the mixer ...

...STAND MIXER SPINS AND SEEMS TO BE AT THE PROPER SPEEDS BUT THE GEARS DON'T ENGAGE AT 10 IT SEEMS TO WANT TO GO BUT YOU CAN STOP THE MIXER BY HAND This mixer is only 2 and a 1/2 years old no problems ...

...KitchenAid Stand Mixer. Power was working prior to worm wheel breakage. Mixer was running, but not spinning. Dismantled Mixer, and replaced worm wheel. Put back together to test, but now, mixer fails ...

kitchenaid kms90 does not turn on but if I turn the beaters it will start to spin buts sparks from the switch You probably need a new switch AND motor brushes.

my KitchenAid Mixer switches on, but doesn't pulse. Explain please , the mixer does not pulse like a food processor does it just spins.

...the mixer is on and spinning or it is on and not spinning. if it is not spinning it is a gear problem and takes about 2 hours to do and cost about 25 dollars. send us some more info and we can

...Kitchenaid Artisan stand mixer is spinning too fast after a voltage fluctuation. I was using the mixer to knead dough, I switched it off for a few seconds and when I turned it on again it started ...

...spinning? There is a pin on the tapered spindle that fits into a grove in the mixer. If the attachment is not pushed far enough into the mixer housing and screw is not locked down the attachment will ...