...Kitchen aid KSM5PSGR mixer and removed the magnet looking ractangular rods. I noticed that there is a notch on one edge. Can I re-assemble them in any oritntation or is there a certain way they need ...
Question about K45SS Classic Stand Mixer
...Kitchen Aid mixer attachement rod won't spin when turned on. You can hear the motor turning, but the rod doesn't spin. It sounds likme you may have stripped/broken one of the gears up in the mixer ...
Question about KSM150PS Artisan Series Stand Mixer
...side of my kitchen aid stand mixer. I cannot move it in or out. So far the mixer is working but when I tilt the head seems a little unstable. Tap it back in. . Are you sure it is not a locking
Question about KITCHEN AID 5 Quart Artisan Series Stand Mixer
Kitchen aid artisan mixer is loose and shaking This could be the pivot rod between the head and the column being loose and out of place. Or it could be the hook activated by the lock lever not ...
Kitchen Aid service agent to look at it. They should be able to get it locking again without wrecking anything. Don't leave it wobbling about or it will get to the point that parts will have to be
Question about KITCHEN AID 5 Quart Artisan Series Stand Mixer
Kitchen Aid Artisan mixer won't turn on as I was using it a part fell out. The part is small consists of a cylinder and a metal rod that is going through the cylinder. KitchenAid 5 Quart Artisan Parts
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions