Questions & Answers for: ics 300 answer

...burn out with the ICs as well. They will need to be replaced. This isn't something that I would attempt on your own. Typically a TV technician will charge between 300 and 400 to fix at your

help my Sony KP-46WT500 46 in. Rear Projection HDTV-Ready Television picture is like a tunnel the display channel numbers and video has a shadow of itself curved, bent,bowed??? it lookes as if the ...

tomtom one xl Dear Sir. My GPS one Xl 4.3 was working fine, suddenly ,it went blank. I turn it back on then it went dark again ,it never come on back again. I purchase it in April 2008. at Best Buy ...

answer. These Ic's break down as a result of other components on the Sus board If you dont have the skills and tools to trace voltage from the control board across to the Caps and the Ic;s i would say

...ICS,and some or all it resistors.U know to solders?Tries websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors. ...

my mitsubishi 55" rear projection tv won't turn on at all. It does not make the clicking sound it normally does when you turn it on and the green light does not flash at all either. Tried unplugging ...

...board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and

...ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and

...ICS and some or all of it resistors too.These parts,must be replaced on the tv convergnce board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and

...board--likely 5 amp.As far as getting help here--I personally answer over 300 questions a week and this area (projection sets) is one I enter every day.First time I have seen your question.SD ...