Questions & Answers for: husqvarna viking designer 1 floppy

viking designer 1 embroidery machine. It reads the disk sometime and other times I get a message, no disk, error, etc It is out of warranty and I was wondering how much it would be to fix or to put an

Husqvarna Viking dealer and check into trading your Designer 1 in for a Designer SE. You will then be able to plug in an external 3.5 floppy drive to read your old disks, a USB stick, or plug directly

...designer 1 and want to upgrade my machine to no lonhger have to use floppy discs Take it to a Vik dealer and they can have the USB port install in the machine in place of the floppy drive. do you ...

...Husqvarna Viking Designer 1 These 3.5-inch floppy disk drives are never produced by the manufacturer of the device, but by one of a few floppy disk drive manufacturers (usually Sony) and as such, ...

...Husqvarna Viking Designer 1 Could need a new drive, could need a new cable, could need a new floppy disk.Try the disks that came with the embroidery unit.  If you put the same disk in 5 times ...

...Viking designer 1 sewing machine Before changing any settings, take your brush (or another small stiff brush) and brush out any loose threads or lint in the upper tension unit disks. Also remove the ...

husqvarna viking designer 1 embroidery machine. Touch screen icon for disk and usb loading is not working but everything else is. Sounds like a loose cable or the USB drive has gone bad. The Designer ...

Designer 1 Embroidery - how to download designs from internet and transfer to floppy disk How do I download designs from the internet and transfer to a floppy disk? Do I need software to do this? I ...

...load floppy disk in machine load one disk, ejected it went to insert another, would not load. It appears to be stuck in the eject mode look at your mechanical structures.. maybe something is