Questions & Answers for: hub from knuckle

...hub/steering knuckle assembly from vehicle. Position front hub/steering knuckle assembly on a press and press front hub out of steering knuckle using a suitable removal tool. Remove E-clip from ...

hub bearing assembly on a 1993 Saturn SL Remove the steering knuckle assembly from the vehicle, as described earlier in this section. For 1991 vehicles, remove the 3 dust shield fasteners and separate

...knuckle. If hub is corroded, pry between hub flange and knuckle Fully remove knuckle pinch bolt. Insert pry bar between lower control arm and steering knuckle. Push down on pry bar to separate ball ...

...the circlip to the wheel knuckle.Using the special tools, install the wheel hub to the wheel knuckle.Install the wheel knuckle. For additional information, refer to Wheel Knuckle in this

...knuckle and the hub and bearing assembly of any foreign material or nicks so the surfaces are clean and smooth. Install the new hub and bearing assembly and tighten the mounting bolts in a crisscross ...

...insert a prybar between hub and steering knuckle and gently pry hub and bearing from knuckle. Tighten stub shaft nut, lower vehicle and with brakes applied, torque stub shaft nut to 70 - 90 ft.

...knuckle and hub and bearing assembly. Remove a wheel lug stud from the hub flange using a C-clamp and Adapter Tool 4150A or equivalent. Rotate the hub to align the removed lug stud with the notch in ...

hub and remove the knuckle from the vehicle. The knuckle will then need to be brought to a machine shop or a shop capable of pressing the old bearing out and pressing the new bearing in. You will ruin

...hub on the knuckle using special tool 09950-600010 or equivalent and a press. Install the axle hub snap ring. Install the lower ball joint on the knuckle. Tighten the ball stud castle nut 76 ft-lb ...

...hub-to-wheel knuckle bolts 71104Wheel bearing and hub assembly Removal Note 8N642567-S36Tie-rod end-to-wheel knuckle nut 9W707254-S427Lower ball joint-to-wheel knuckle nut 10W520215-S427Upper ball ...