SECTION 204-01: Front Suspension
2000 Focus Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 03/18/2003
Wheel Bearing
Special Tool(s)
Installer, Wheel Hub Bearing Cup
204-023 (T73T-1217-A)
205-1how do i change front wheel bearing - 21217.jpg4000-W)
Puller, Bearing
205-D064 (D84L-1123-A)
Installer, Wheel Speed Sensor Ring
206-054 (T93P-20202-A)
Removal
CAUTION: Dohow do i change front wheel bearing - e0002134.jpgt to remove the bearing inner ring.
Using the special tools, remove the bearing inner ring from the wheel hub.
how do i change front wheel bearing - ani_caut.gifh_mi">
Installation
CAUTION: Avoid any impact on the wheel speed sensor ring.
CAUTION: Make sure the wheel speedhow do i change front wheel bearing - e0027604.jpg is clean.
CAUTION: Avoid any contact between the wheel speed sensor ring and a magnetic surface.
Using the special tools, install the new wheel bearing to the wheel knuckle.
Install the circlip to the wheel knuckle.
SOURCE: fixing a 2003 ford focus front wheel bearings
remove the hub and spinle ,tie rod end ,axle nut.ball joint,and seperate from strut and then have new bearing pressed in...or rent a bearing press that works with an impact wrench,but they are a little hard to work with...good luck...lee
1,866 views
Usually answered in minutes!
×