...HDMI port might be loose on your TV. I had the same problem. I went to radio shack bought a solder and soldering metal with some flux. I then opened my 37inch Sceptre Naga and aligned the hdmi ...
...hdmi 2 on my tv selection ? i have tried this but always loose one of the signals why ? Yes you should be able to do that. Make sure u switch between hdmi 1 and 2 on your tv. If you are still having ...
Question about 52 In. LCD HDTV
...HDMI connector broke loose from its mounting inside the tv. The rear HDMI connector broke loose from its mounting on the board inside the tv. Can the HDMI connector be reattached to the board or ...
Question about LNR269D 26 in. LCD Television
...HDMI connector broke loose from its mounting inside the tv. The rear HDMI connector broke loose from its mounting on the circuit board inside the tv. Can the HDMI connector be re-attached to the ...
loose hdmi monitor out connection brand new cable I have a loose hdmi monitor out connection at rear of my amp both inputs are tight, brand new cable. Can this be fixed? Also the playback appears to ...
...hdmi ports not working that means the ports are faulty if all the setting are proper in setup. as the ports are soldered to the unit internally.if the soldering gets loose the connection will not get ...
loose connection on the HDMI input. The condition of "No Signal" is displayed on the screen of the television. Slight and gentle movement of the HDMI cable is able to momentarily correct the
...hdmi cable ..and select the other one and restart ..after that plug the one you want to use and will work ...resetting it to the original factory settings will work too ..but will make you loose user ...
Question about DP26647 26 in. LCD TV
...is a loose connection or a short. Sounds like your hdmi jacks are ( pardin the pun ) jacked up. Shine a flashlight in the jacks to see if the pins look loose or if the jack has been widened at
...sound My rca home theater system with receiver keeps loosing sound randomly when watching dvds via hdmiand does not work again until it is shut off and turned back on. It works well using every
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions