...shifter What part is loose? If it is the arm on the shift rod you might be able to get a long 1/4 ball allen in behind the primary case and tighten it or get a new bolt installed and tightened but if ...
Question about 2006 FLHR Road king
...shifter arm stripped out can you change this with out pulling primary off? The rear shifter arm has stripped out and I have tried to get it off but I am afraid to pull the primary since I have never ...
harley davidson shift linkage adjustment adjustment on the shift linkage So, I take it you want to adjust the shift linkage and not the height of the foot pedal. To adjust the shift linkage and not ...
Question about 2002 FLHRCI Road King Classic
...position of the shifter arm. It should be sitting just behind the front bolt on the transmission cover plate. If it is not then the shifter arm has likely been loose and rotated on the shifter
shifter removal trans will not downshift Spring broken on shifter arm. Remove primary cover and inspect.
loose linkage HOW TO TAKE OFF BACK BALL JOINT WITHOUT BREAKING SHIFTER ARM Loosen linkage fasteners, remove from shifter arm, loosen jam nut and unscrew the back ball joint.
Question about 2005 XL 1200 C Sportster Custom
what are the heal toe shifter parts on a ultra The parts are a forward and a rearward shifter arm and foot rubber that both fit onto a splined shift rod above the foot rest pad.
...Harley softail If you mean the shifter arm that is attached to the shifter shaft that exits the transmission behind the primary case then if you cannot loosen and remove the allen socket screw in the ...
Question about 2005 FXSTD - FXSTDI Softail Deuce
...shifter arm behind the primary you likely have a broken shifter arm assembly. These arms fail where they are welded to the pawl mechanism inside the transmission. If it is indeed broken you will have ...
Question about 2005 FXSTD - FXSTDI Softail Deuce
...Harley Fat Boy will not shift past 2nd gear. It will down shift and into nuetral. While riding yesterday i started noticing it was shifting weird. I would try to step on the rear shift arm to down ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions