Questions & Answers for: harley davidson bobber

FIRE and FUEL........NOT CRANKING !!!!!!! 1988 sportster xlh 883/1200 (bobber) previous owner had moved ignition switch to ignition module cover.scooter was cranking real good. then went dead (while ...

I have a 1974 ironhead, starter turns but will not kick out .made bike into bobber none of original wire harness is used, I really have no idea what im doing when it comes to wiring. any help would be

correctly. i dont really know what model this bike is. its titled as a1941 hrd mc . ? Pos this ? at harleytalking.com ..they have helped me.... good luck.

harley davidson) Since you refer to the bike you're working on as a "bobber", this tells me that the bike is no longer original. I can send you a wiring diagram for a 91-93 Fat Boy but I can't

installing a speedometer I recently got a 79 iron-head and there is no front brake, speedo, tach or front or rear turn signals. Its a rigid frame and a paughco springer front end. I measured the ...

...service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice

...harley breaks up during acceleration its a sportster 1000 1980. I bought it a month ago the only problem when I got it was gas would run out of reserve and it would break up in fourth gear the guy ...

i want to run rear turn signals only on my 2001 883 bobber. but they light but wont blink unless i plug in front signal lights????????? help Hi Anonymous, your going to need resistors. Check with your

...Cable Harley Davidson How To Properly Lubricate Adjust The Clutch Cable Harley Davidso How To Change Engine Oil Filter Without The Mess Harley Davidson Softail ...

Harley Davidson iron hear kickstart only is VERY hard starting.. Sometimes not at all and when it does it runs so ruff it backfires like an AK47..ANY SUGGESTIONS? backfiring is caused by over advanced