Questions & Answers for: harley base gasket replacement

...base gasket. If so, to fix the leak you must pull the cylinder off to get to the gasket. This is a common problem with the Evolution engine. This job will require that the fuel tank be removed. The ...

base gasket leak. how to repair Simply, the rocker box and cylinder will have to come off to replace the cylinder base gasket. And the out and inner primary will have to come off to replace the gasket

...with a 1340cc Evolution motor w 5000 miles There is a slight oil leak from the rear cylinder base gasket. Can this be fixed without replacing the gasket?? Thanx. no it cant it has to be

...harley mech said it may be the umbrella valves,there seems to be some confusion about umbrella valves in the 96' fxr,can anyone tell me does my evo have these valves?.I've had lots of other ...

...a 1993 evo harley motor I've seen some oil down around the cylinder base, re-torque the bolts until you decide to replace the possibly stretched bolts or base gasket. Be gentle and do it in

...base rear sylinder It looks like it needs a gasket. can i ride the bike until I can get it fixs You can ride it, but the leaking oil could cause problems if it gets on the rear tire, brakes, etc. You ...

...base if I tighten the hex bolts it stops but comes back. Replace the gasket and tighten the bolts to the proper torque and you should be ok. It's very rare for that particular cover to warp, but you ...

head gasket change out head gasket . Don't know what you're asking exactly, but if you remove the head to get to the gasket, you'll have to replace the cylinder base gasket at the same time.

base gasket leaking back cylinder Hi Anonymous, replace it. Good luck

...harley after base and head gasket replacement Something is not back together properly, so retrace your steps and thing about what was spinning that could be misplaced? You don't say what model etc so ...